How to Build a Golf Simulator Enclosure

Building a golf simulator enclosure is essential as it provides the necessary structure for a simulator setup and helps you to level up your game by opening multiple possibilities.

Although it’s costly to purchase an enclosure and building one for yourself may seem difficult at first, with serious planning and some help from a friend, you can build your own golf simulator enclosure according to your requirements.

Sounds amazing? In today’s conclusive guide, we’re going to discuss everything you need to know about building a golf simulator enclosure. 

Let’s hop into it!

Key Considerations Before Building a Golf Simulator Enclosure

Before we dig into the details of building a golf simulator enclosure, I want you to know about some important factors that you must consider before starting your DIY project.

Enclosure Size 

The first step in building a golf simulator enclosure is to decide its size. For this, you will need to consider the available size of the room and the height of the ceiling. 

Make sure to leave enough room where you can comfortably swing your clubs. You also need to consider the height of your hitting net and the projector screen if you’re using one.

Once you have precise dimensions of the room, you can begin planning the layout of your golf simulator enclosure.

Remember that you can’t go wrong with selecting the enclosure size because this affects the overall fitting and a small mistake can lead to colossal consequences.

Enclosure Frame

The enclosure frame is the basic structure on which the whole golf simulator enclosure setup is built, so it should be solid.

An aluminum enclosure frame is a good choice for durability, but it will be expensive, and if you’re on a budget, the odds may not be in your favor. 

However, you can consider using PVC pipe for the frame and covering it with a tarp or other waterproof material.

Enclosure Walls 

The next step is to choose the type of material that you’re going to use for the walls of your golf simulator enclosure. 

You can potentially go with various material choices, but wood is the most popular choice because of its durability and longevity.

Enclosure Roofing

Once you have chosen the material for the walls, you need to decide on the type of roof you want for your golf simulator enclosure. 

You can opt for PVC roofing, which is relatively cheaper than other materials, but it won’t be suitable if you want the enclosure to last for years.

Aluminum roofs, on the other hand, are durable enough to last for many years.

Enclosure Flooring

After you’re done with the roofing process, the next step is to choose the type of flooring for your golf simulator enclosure. 

Most golfers use carpet floors in their simulator enclosures as they are very comfortable and provide extended life.

In addition, you can opt for golf-hitting mats that feature virtual green grass to provide a more realistic experience, but this will increase the cost of the flooring.

Enclosure Lighting 

Lighting is an essential consideration in deciding the quality of your gameplay because it helps the sensors to detect the movement of the golf ball and provides a comfortable vision of the hitting bay.

The most efficient and economical choice in this regard is LED lighting because of its high brightness and tendency to last for many years.

What Tools Do I Need to Build a DIY Golf Simulator Enclosure at Home?

After finalizing the key considerations for your golf simulator enclosure, you’ll need to look for the required tools for building it. 

Once you have these tools in place, you can start building your golf simulator enclosure. 

  • Pencil, tape measure, and paper 
  • A straight edge, set square, or spirit level to ensure the geometry 
  • You will usually use a rigid frame built from lengths of metal piping. This may be aluminum or similar lightweight metal. Sometimes electric conduit piping is also used. 
  • An electric saw capable of cutting metal
  • A spanner, wrench, drill, and screwdriver for tightening joints in your frame
  • Staples or other fixings for netting and other enclosure fabric
  • Corner connectors 
  • An impact screen with proper attachments
  • Bungees or zip ties for attaching your impact screen to your enclosure
  • Safety equipment such as eye protection, ear protection, and a fixed-position bench

9 Easy Steps to Build a Golf Simulator Enclosure

Now that we have fulfilled all the pre-build requirements and gathered all the required tools, it’s time to build a golf simulator enclosure, and I’m gonna break the whole process into nine easy steps.

1. Choose the Location for Your Golf Simulator Enclosure

The first step in building a golf simulator enclosure is selecting the location. This can be your garage, basement, or living room.

Ideally, you’ll want a space that is large enough to accommodate your swing and the equipment you’ll be using with your golf simulator enclosure. 

Start with taking precise dimensions of your surroundings, including room space, ceiling height, and size of the wall where you’ll hang the impact screen

2. Gather Your Material

After finalizing the location, bring your basic building material such as aluminum pipes, netting, bungees, and zips.

You can either buy a ready-to-build package or take a DIY route to source the material. 

Once your material is in place, start cutting the aluminum pipes to planned dimensions using the required tools.

3. Build the Enclosure Frame

Building an enclosure frame can be as simple or as complex as you’d like, but the important thing is to make sure the frame is sturdy enough to support the weight of the equipment.

Layout all the equipment and start with placing each length of the pipe to its corresponding corner and mid-length connector. 

Tighten the nuts or screws after building a rectangular frame.

4. Set Up the Impact Screen

After building the enclosure frame, hang the golf impact screen to it using bungees and zip ties.

Make sure that your impact screen doesn’t have a mismatched size or aspect ratio and hangs with balanced tension on all sides. 

The best way to ensure this is by buying an impact screen along with your golf simulator enclosure frame. 

5. Add Blackout Fabric and Foam Panels

To block the ambient light from distorting the display, a thick pitch-black polyester blackout fabric is recommended. 

After covering the whole enclosure frame with fabric, secure it using velcro and bungee straps. 

If you’re on a budget, using dark-colored curtains instead of polyester fabric can also be fruitful.

For protecting the enclosure frame from damage and minimizing the bounceback, secure the frame with foam panels using double-sided tape.

6. Add the Netting

Netting provides extra protection by securing the sides of the simulator enclosure and tackling the bounceback of high-speed golf balls. 

Attach heavy-duty mesh tarps on both sides of the enclosure walls using staples and make sure that it’s hung securely and tautly to avoid damage to your equipment.

7. Set Up Your Lighting

After setting up your golf simulator enclosure, add LED lighting in the required area for safety and accuracy while using your golf simulator. 

8. Test It Out

Now that everything is in place, it’s time to give it a try. Invite some friends over and tee up for a round of virtual golf to see how it’s working.

Important Factors That Affect Golf Simulator Enclosure

While you’re building your golf simulator enclosure, looking for the following important facts might be of great significance:

Depth of Golf Simulator Enclosure

Although enclosure depth is a matter of personal preference, it does affect your overall experience on a simulator setup. 

Deep enclosures tend to be safer and allow more immersion with optimum lighting and brightness. 

In addition, they’re more secure because of the extra netting of foam padding on the side walls. 

However, all of this requires more materials and longer pipes, which increases the overall cost of your golf simulator enclosure.

Aspect Ratio

Your golf simulator enclosure goes side by side with your golf impact screen, that’s why the aspect ratio matters. 

If you build an enclosure with a mismatched aspect ratio of the impact screen, you’ll have to face image bleeding and distortion. 

Per recommendation, your golf simulator enclosure should be at least six inches wider than your golf impact screen for proper image projection. 

Assembling and Disassembling the Golf Simulator Enclosure

Assembling and disassembling the golf simulator enclosure also counts to a larger degree, depending on how regularly it happens.

I won’t recommend dismantling a DIY golf simulator enclosure if you’ve not planned it accordingly. In such cases, buying a ready-to-build frame is more favorable.

Hanging the Projector

If you plan to use a projector for displaying the image on the impact screen, you’ll need to consider it while building your golf simulator enclosure because of the following reasons:

  • You don’t want shadows on your golf impact screen.
  • You don’t want to hit the projector with your golf balls.
  • You want to throw an appropriate image that matches the aspect ratio of the impact screen.

For this, you have to plan whether you’re going to hang the projector to the ceiling or the enclosure frame itself.

Cost of Building a Golf Simulator Enclosure 

Building a golf simulator enclosure can cost from less to more depending on the components and materials you’ve used for it. 

For proper cost analysis, let’s break them into sections and discuss each one in detail.

  1. A DIY Setup With Locally Sourced Material

Sourcing your golf simulator enclosure material on your own can cost you a variable price depending on the market rates of the required stuff. 

In addition, you may have to spend a lot of time finding cheap goods, but once you find them, it is nothing less than a jackpot.

The overall cost of a DIY simulator enclosure, including everything, is roughly around $500, which is even less than half of the cost of golf simulator enclosures available in the market.

The only downside of this route is that you may not find the exact dimensions of the frame piping, which you’ll eventually have to cut to the required size. 

  1. An Open Setup Without Enclosure Frame and Netting

Excluding the enclosure and side netting can reduce the cost to a substantial level, but I won’t recommend it because you’ll get proper immersion to experience a full-fledged simulation experience. 

Secondly, you’ll need a metal or wooden rod that’s strong enough to carry the impact screen and foam panels all over the wall for safety.

Depending on your room size, the cost of an open setup can vary from $300 to $400. 

  1.  Ready-to-Build Enclosure With Impact Screen

Many brands sell ready-to-build enclosures that come in various sizes and include impact screens with proper measurements. 

Although these are the perfect golf simulator enclosures, they cost way more than the ones you’ll build for yourself. 

Roughly, you’re expected to pay $1,500 to $3,000 depending on the size and quality of the enclosure, which may not be favorable if you’re on a budget.

Here are some buying options for you to consider:

Best Overall Golf Impact Screen & Enclosure: SwingBay Golf Simulator Screen & Enclosure


✅ Smooth and crisp display

✅ Premium build

✅ Takes impacts up to 250 mph 

✅ Blackout sides and upper walls

✅ Protects impact screen from external light


❌ Highly-priced

Best Budget Golf Impact Screen & Enclosure: PerfectBay Golf Simulator Screen Enclosure

Credit to Top Shelf Golf


✅ Optimized for both 4:3 and 16:9 aspect ratios

✅ 100% on-screen image

✅ Provides shading effect for clear image

✅ Easy assembly 

✅ Economical price


❌ Not a premium-quality enclosure 

For more options, hop on to this article.

Frequently Asked Questions

How much space is required for a golf simulator enclosure?

The required space for a golf simulator enclosure depends on the dimensions and aspect ratio of the impact screen. In addition, you’ll have to consider what components you’re going to include in your setup.

Is side netting necessary for a golf simulator enclosure?

Side netting is good for protecting the surroundings from damage that a high-speed golf ball can cause; however, it’s not mandatory.

How to ensure aesthetics in your golf simulator enclosure?

You can make your golf simulator look elegant by symmetrically placing the screen and extending it to the edges of the blackout fabric. Adding foam padding with the same color can also help in improving the aesthetics. 


Building a golf simulator enclosure can be different for different golfers depending on their circumstances. However, if you’ve completely read this article, I can assure you that things are going to be basic for you. 

If you find any hurdles while building your golf simulator enclosure, referring to this conclusive guide will hopefully help you find a solution.

Still, have queries? Jump into the comment box!


Leave a Comment